BETAFPV

BETAFPV Toothpick F722 2-6S AIO 35A (MPU6000)

$2,598.90 $2,796.31

F722 2-6S AIO 35A FC is a very reliable FC that is made to meet your advanced FPV needs. Comes with an F722 chip and BLHeli_S ESC firmware, this board provides a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight. What's more, F722 AIO 35A FC has specially added a 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, super easy to install. It also can handle up to 6S of input voltage and push your FPV racer to the max.

Bullet Point

  • Compare with F4 AIO 35A FC, F722 FC's firmware is upgraded from F411 to F722, providing a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight.

  • F722 AIO 35A FC has specially added a 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, perfect for the pilots who enjoy the DJI Digital VTX system.

  • 6 full UARTs are available on this board. With plenty of UARTS, Pilots could have more options for external parts like VTX, GPS, Receiver, and other components.

  • It can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.

  • With the 6S battery and this F722 35A AIO toothpick FC, the drone will break through the limit of the power of the toothpick drone, exploring more possibilities in 4-5'' drones.

Specification of FC

  • Item: F722 35A AIO FC(BLHeli_S)
  • Weight: 7.06g
  • CPU: STM32F722RET6
  • Gyro: MPU6000
  • Mounting hole size: 26mm * 26mm
  • Firmware version: betaflight_4.2.x_BETAFPVF722
  • OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
  • Support programmable LED like WS2812 etc
  • Built-in current sensor

Specification of ESC

  • Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
  • Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection)
  • Input voltage: 2S-6S Lipo
  • Continuous current: 35A
  • Peak current: 40A
  • ESC firmware: BLHeli_S
  • Indicators: 2 indicators: receiver indicator (green)/Flight control power indicator (red)
  • Capacitance: CS|5*10*13mm|470μF|35V
  • Connecter: 80mm 14AWG silicone cable with XT60
  • Recommended motors: 14XX series, 15XX series, 16XX series, 18XX series, 20XX series

You may also like

Recently viewed